Handstück E Type Straight Nosecone Dental Low Speed Handstück 40000rpm

Spezifikation:

Zulässige Höchstgeschwindigkeit.....40000 (U/min);

Bohrer....∮2.35 Handstückbohrer.;

Übersetzungsverhältnis ...... 1:1

2.Mounting Burs

⑴Turn the Bur Lock Ring all the way in the direction of black arrow to open the chuck. Insert a bur into the chuck.(Fig.2)

⑵Return the Bur Lock Ring to the original position until a click sound is heard（Fig.2）



3.Lubrication.

Supply SPRAY after each use and or before autoclaving.

①Push spray nozzle attachment over the SPRAY nozzle until it firmly seats.

②Shake the can 3-4 times to well mix lubricant and propellant.

③Insert the spray nozzle in the rear of the handpiece and spray for approximately 2-3 seconds until the oil comes out of the handpiece head or nose.

4.cleaning and sterilization:

Cleaning:

Wipe clean the handpiece sheath with alcohol-dipped soft tissue or Baumwolle. Never clean the handpiece in boiling water or in chemicals,with wire brushes, or in ultrasonic cleaner.

Sterilization:

Steam autoclave is recommended .Autoclave sterilization required after each patient as noted below:

①Clean the handpiece sheath as described above.

②Lubricate the handpiece with SPRAT(Ref,3 Lubrication).

③Place handpiece into autoclaving pouch and seal it in accordance with instruction on the pouch.

④Autoclavable up to a max. 135 ℃ (275℉)

ex.)Autoclave for 20 min. at 121℃ (250℉).or 15 min.at 132℃(270℉).